Články v časopisech s faktorem dopadu dle Clarivate

2019

ŠEBEK, F.; PARK, N.; KUBÍK, P.; PETRUŠKA, J.; ZAPLETAL, J. Ductile fracture predictions in small punch testing of cold-rolled aluminium alloy. Engineering Fracture Mechanics, 2019, roč. 206, č. 1, s. 509-525. ISSN: 0013-7944. (odkaz)

PROFANT, T.; HRSTKA, M.; KLUSÁK, J. An asymptotic analysis of crack initiation from an interfacial zone surrounding the circular inclusion. COMPOSITE STRUCTURES, 2019, roč. 208, č. 1, s. 479-497. ISSN: 0263-8223. (odkaz)

2018

ŠEBEK, F.; PETRUŠKA, J.; KUBÍK, P. Lode dependent plasticity coupled with nonlinear damage accumulation for ductile fracture of aluminium alloy. Materials & Design, 2018, vol. 137, no. 1, p. 90-107. ISSN: 0264-1275. (odkaz)

PEČ, M.; ZAPLETAL, J.; ŠEBEK, F.; PETRUŠKA, J. Low-Cycle Fatigue, Fractography and Life Assessment of EN AW 2024-T351 under Various Loadings. Experimental Techniques, 2018. (odkaz)

KUBÍK, P.; ŠEBEK, F.; PETRUŠKA, J. Notched specimen under compression for ductile failure criteria. Mechanics of Materials, 2018, vol. 125, no. 1, p. 94-109. ISSN: 0167-6636. (odkaz)

HADAŠ, Z.; JANÁK, L.; SMILEK, J. Virtual prototypes of energy harvesting systems for industrial applications. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2018, roč. 110, č. 1, s. 152-164. ISSN: 0888-3270. (odkaz)

KOCIS, J.; KELBL, M.; KOCIS, T.; NÁVRAT, T. Percutaneous versus open pedicle screw fixation for treatment of type A thoracolumbar fractures. European Journal of Trauma and Emergency Surgery, 2018. (odkaz)

BERTOLLA, L.; CHLUP, Z.; TATARKO, P.; HANZEL, O.; ŠEVEČEK, O.; ROUPCOVÁ, P.; DLOUHÝ, I. Preparation and characterization of novel environmentally friendly Al2O3/SiO2/CaO ceramic foams. Ceramics International, 2018, vol. 44, no. 1, p. 19063-19069. ISSN: 0272-8842. (odkaz)

LEGUILLON, D.; MARTIN, É.; ŠEVEČEK, O.; BERMEJO, R. What is the tensile strength of a ceramic to be used in numerical models for predicting crack initiation? INTERNATIONAL JOURNAL OF FRACTURE, 2018, vol. 212, no. 1, p. 89-103. ISSN: 0376-9429. (odkaz)

MARCIÁN, P.; WOLFF, J.; HORÁČKOVÁ, L.; KAISER, J.; ZIKMUND, T.; BORÁK, L. Micro finite element analysis of dental implants under different loading conditions. COMPUTERS IN BIOLOGY AND MEDICINE, 2018, č. 96, s. 157-165. ISSN: 0010-4825. (odkaz)

KOTOUL, M.; PROFANT, T. Asymptotic solution for interface crack between two materials governed by dipolar gradient elasticity. Engineering Fracture Mechanics, 2018, roč. 201, č. 1, s. 80-106. ISSN: 0013-7944. (odkaz)

MARTIN, É.; LEGUILLON, D.; ŠEVEČEK, O.; BERMEJO, R. Understanding the tensile strength of ceramics in the presence of small critical flaws. Engineering Fracture Mechanics, 2018, vol. 201, no. 1, p. 167-175. ISSN: 0013-7944. (odkaz)

KUBÍK, P.; ŠEBEK, F.; PETRUŠKA, J.; HŮLKA, J.; PARK, N.; HUH, H. Comparative investigation of ductile fracture with 316L austenitic stainless steel in small punch tests: Experiments and simulations. Theoretical and Applied Fracture Mechanics, 2018, vol. 98, no. 1, p. 186-198. ISSN: 0167-8442. (odkaz)

2017

MASINI, A.; ŠIŠKA, F.; ŠEVEČEK, O.; CHLUP, Z.; DLOUHÝ, I. Elastic properties of multi- layered ceramic systems for SOCs. International Journal of Applied Ceramic Technology, 2017, roč. 2017, č. 1, s. 1-10. ISSN: 1744-7402. (odkaz)

HALABUK, D.; NÁVRAT, T. Thermomechanical assessment of fuel rod cladding made of zirconium alloy and silicon carbide material during reactivity-initiated accident. NUCLEAR SCIENCE AND ENGINEERING, 2017, roč. 189, č. 1, s. 69-81. ISSN: 0029-5639. (odkaz)

KOTOUL, M.; SKALKA, P.; ŠEVEČEK, O.; BERTOLLA, L.; MERTENS, J.;MARCIÁN, P.; CHAWLA, N. Crack bridging modelling in Bioglass® based scaffolds reinforced by poly-vinyl alcohol/ microfibrillated cellulose composite coating. Mechanics of Materials, 2017, roč. 110, č. 1, s. 16-28. ISSN: 0167-6636. (odkaz)

BOCCACCINI, D.; ŠEVEČEK, O.; FRANDSEN, H.; DLOUHÝ, I.; MOLIN, S.; HJELM, J.; CANNIO, M.; HENDRIKSEN, P. Determination of the bonding strength in solid oxide fuel cells’ interfaces by Schwickerath crack initiation test. Journal of the European Ceramic Society, 2017, roč. 2017, č. 37, s. 3565-3578. ISSN: 0955-2219. (odkaz)

RIDWAN-PRAMANA, A.; MARCIÁN, P.; BORÁK, L.; NARRA, N.; FOROUZANFAR, T.; WOLFF, J. Finite element analysis of 6 large PMMA skull reconstructions: A multi-criteria evaluation approach. PLOS ONE, 2017, roč. 12, č. 6, s. e0179325. ISSN: 1932-6203. (odkaz)

SMILEK, J.; HADAŠ, Z. Improving power output of inertial energy harvesters by employing principal component analysis of input acceleration. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2017, roč. 85, č. 1, s. 801-808. ISSN: 0888-3270. (odkaz)

JENÍK, I; KUBÍK, P; ŠEBEK, F; HŮLKA, J; PETRUŠKA, J. Sequential simulation and neural network in the stress–strain curve identification over the large strains using tensile test. Archive of Applied Mechanics, 2017. (odkaz)

NOVÁK, K.; POLZER, S.; KŘIVKA, T.; VLACHOVSKÝ, R.; STAFFA, R.; KUBÍČEK, L.; LAMBERT, L.; BURŠA, J. Correlation between transversal and orthogonal maximal diameters of abdominal aortic aneurysms and alternative rupture risk predictors. COMPUTERS IN BIOLOGY AND MEDICINE, 2017, roč. 83, č. 3, s. 151-156. ISSN: 0010-4825. (odkaz)

WANG, M.; GONG, Y.; ALZINA, F.; SVOBODA, O.; BALLESTEROS, B.; TORRES, C.; XIAO, S.; HE, J.; ZHANG, Z. Raman antenna effect from exciton–phonon coupling in organic semiconducting nanobelts. NANOSCALE, 2017, vol. 9, no. 48, p. 19328-19336. ISSN: 2040-3364. (odkaz)

2016

KUBÍK, P.; ŠEBEK, F.; HŮLKA, J.; PETRUŠKA, J. Calibration of ductile fracture criteria at negative stress triaxiality. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2016, roč. 108-109, č. 4, s. 90-103. ISSN: 0020-7403. (odkaz)

PETRUŠKA, J.; NÁVRAT, T.; ŠEBEK, F. Novel approach to computational simulation of cross roll straightening of bars. Journal of Materials Processing Technology, 2016, roč. 233, č. 7, s. 53-67. ISSN: 0924-0136. (odkaz)

ŠEBEK, F.; KUBÍK, P.; HŮLKA, J.; PETRUŠKA, J. Strain hardening exponent role in phenomenological ductile fracture criteria. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 2016, roč. 57, č. 5-6, s. 149-164. ISSN: 0997-7538. (odkaz)

ŠEBEK, F.; KUBÍK, P.; PETRUŠKA, J.; HŮLKA, J. Extremely Low-Stress Triaxiality Tests in Calibration of Fracture Models in Metal-Cutting Simulation. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2016, roč. 47, č. 11, s. 5302-5312. ISSN: 1073-5623. (odkaz)

SKALKA, P.; NAVRÁTIL, P.; KOTOUL, M. Novel approach to FE solution of crack problems in the Laplacian-based gradient elasticity. Mechanics of Materials, 2015, roč. 2016, č. 95, s. 28-48. ISSN: 0167-6636. (odkaz)

RIDWAN-PRAMANA, A.; MARCIÁN, P.; BORÁK, L.; NARRA, N.; FOROUZANFAR, T.; WOLFF, J. Structural and mechanical implications of PMMA implant shape and interface geometry in cranioplasty – a finite element study. JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY, 2016, roč. 44, č. 1, s. 34-44. ISSN: 1010-5182. (odkaz)

SUZUKI, N.; AOKI, K.; MARCIÁN, P.; BORÁK, L.; WAKABAYASHI, N. A threshold of mechanical strain intensity for the direct activation of osteoblast function exists in a murine maxilla loading model. Biomechanics and Modeling in Mechanobiology, 2016, roč. 15, č. 5, s. 1091-1100. ISSN: 1617-7959. (odkaz)

ŠEVEČEK, O.; KOTOUL, M.; LEGUILLON, D.; MARTIN, É.; BERMEJO, R. Modelling of edge crack formation and propagation in ceramic laminates using the stress–energy coupled criterion. Engineering Fracture Mechanics, 2016, roč. 167, s. 45-55. ISSN: 0013-7944. (odkaz)

BOCCACCINI, D.; ŠEVEČEK, O. et al. Investigation of the bonding strength and bonding mechanisms of SOFCs interconnector-electrode interfaces. MATERIALS LETTERS, 2016, roč. 2015, č. 162, s. 250-253. ISSN: 0167-577X. (odkaz)

SMILEK, J.; HADAŠ, Z. A study of kinetic energy harvesting for biomedical application in the head area. Microsystem Technologies, 2016, roč. 22, č. 7, s. 1535-1547. ISSN: 0946-7076. (odkaz)

HADAŠ, Z.; VETIŠKA, V.; VETIŠKA, J.; KREJSA, J. Analysis and efficiency measurement of electromagnetic vibration energy harvesting system. Microsystem Technologies, 2016, roč. 22, č. 7, s. 1767-1779. ISSN: 0946-7076. (odkaz)

LEJČEK, P.; ŠANDERA, P.; HORNÍKOVÁ, J.; POKLUDA, J.; GODEC, M. On the Segregation Behavior of Tin and Antimony at Grain Boundaries of Polycrystalline bcc Iron. Applied Surface Science, 2016, roč. 363, č. 1, s. 140-144. ISSN: 0169-4332. (odkaz)

SKÁCEL, P.; BURŠA, J. Poisson's ratio of arterial wall – inconsistency of constitutive models with experimental data. Journal of the mechanical behavior of biomedical materials, 2016, roč. 54, č. 1, s. 316-327. ISSN: 1751-6161. (odkaz)

SLAŽANSKÝ, M.; POLZER, S.; BURŠA, J. Analysis of Accuracy of Biaxial Tests Based on their Computational Simulations. Strain, 2016, roč. 52, č. 5, s. 424-435. ISSN: 1475-1305. (odkaz)

KOUTNÁ, N.; HOLEC, D.; SVOBODA, O.; KLIMASHIN, F.; MAYRHOFER, P. Point defects stabilise cubic Mo-N and Ta-N. Journal of Physics D: Applied Physics, 2016, vol. 49, no. 37, p. 1-8. ISSN: 0022-3727. (odkaz)